Dimensions:                       

Height                            1260mm/49.6"       

Width                             620mm/24.4"        

Depth                             430mm/16.9"      

Power Requirement                110Vac/220Vac 50/60HZ 

Power Consumption               30VA

Operating Temperature Range     -20/-4°F to 70 / 158°F

Compressed Air Input Range      87-145PSI/6-10bar /600-1000kPa

Nitrogen Purity                    ≥95%

Nitrogen Output                   58L/min(2.0cfm)@116PSI/8bar/800kPa

                                   Absorption pressure

Maximum Nitrogen Pressure in Tank    

102PSI/7bar/700kPa

Operation Range                   15-72PSI,1.0-5bar,0.1-0.5MPa,1.0-5kgf/cm²

Resolution                        1PSI, 0.1bar, 0.01MPa, 0.1kgf/cm²

Units of measurement             PSI, bar, MPa, kgf/cm²

Specifications:

Generates nitrogen from your compressed air

2 Pre-Filters

50L/13.2gal(us)internal nitrogen storage tank

Auto-start inflation

Remain at last setting

Audible and visual end of the cycle signal indicators

LED display

1 No.*10m/32.8ft standard hose with single clip-on open type chuck

To increase the purity of nitrogen in the tire,the valve cores must be removed manually and allow all the air to escape from the tire before inflate tire with nitrogen,firstly the unit will pump the air 0-99 seconds from the tire by the internal vacuum generator,then inflate nitrogen to the target setting tire pressure.